Sony HXC-FB75KC 3 2/3" Exmor CMOS Sensors SD/HD Studio Camera With Viewfinder And Lens

Sony HXC-FB75KC 3 2/3" Exmor CMOS Sensors SD/HD Studio Camera With Viewfinder And Lens

  • $0.00


HIGHLIGHTS

  • Flexible signal outputs 1080-line HD at 59.94i, 50i, 29.97 PsF and 25 PsF; 720-line HD at 59.94p and 50p; SD at 576/50i and 480/59.94i
  • Outstanding sensitivity: F12 at 59.94i (F13 at 50i)
  • Powerful system camera designed to work with the current HXCU-FB70 fiber interface camera control unit, sold separately
  • Built-in fiber optic interface supports cable runs of up to 350 meters (1,150 feet) of (CCFN) Hybrid fiber cable (with CCU power) or up to 10 kilometers (6 miles) of Single Mode Fiber cable (with local power)
  • HDVF interface for viewfinder cable connection supports portable HDVF viewfinders and new OLED HDVF viewfinders
  • 3 gate Skin Tone Detail helps your on-screen talent look their best
  • Low noise: signal-to-noise ratio of 60 dB (with noise suppression)
  • Along with the standard 2x, the HXCFB75 now provides 4x Digital Video Extender
  • Slow Shutter – up to 8 frames (selectable in 1 frame increments)
  • TLCS (Total Level Control System) unifies lens iris, gain, and shutter

The HXC-FB75 is a high-performance—yet cost effective—HD camera system that inherits Sony’s proven operability from the highly regarded DXC-D Series of system cameras. The camera is equipped with three 2/3-inch Full HD Exmor® CMOS sensors to provide excellent sensitivity (F12 at 1080i/60) with a low noise ratio. These sensors are common with the HXC-P70, HXC-D70 and PXWX400. This enables easy integration and system flexibility. A wide range of output formats are available, including 1080i/59.94, 50, 1080 PsF/29.97, 25, 720p/59.94, 50, 576i/50 and 480i/59.94. The focus assist function enables precise focusing. Video/Audio and control signal transmission, with power, can extend up to 1,100 ft via Hybrid Optical Fiber Cable. The camera is also controllable from a CCU panel and remote controller. The HXC-FB75KC camera package is supplied with the HDVF-L10 3.5-inch QHD color LCD viewfinder, ENG HD 20x zoom lens and omni-directional monaural electret condenser microphone.

LENS

Lens mount Sony bayonet mount

CAMERA SECTION

Video Format No

MEDIA

Convenience Features
Camera Specifications Detail:
Built-in-Filters CC: Electrical
ND: 1; CLEAR, 2; 1/4ND, 3; 1/16ND, 4; 1/64ND
Effective Picture Elements 1920 x 1080 (H x V)
Effective Pixels 1920 x 1080 (H x V)
Gain Selection -3, 0, 3, 6, 9, 12 dB
Horizontal Resolution 1,000 TV lines or higher
Optical System F1.4 prism system
S/N Ratio Typical 60dB*2 (1080/59.94i)
Sensitivity F12 (59.94 Hz), F13 (50 Hz)
Shutter Speed 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (59.94i mode)
1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec (50i mode)

 

General Specifications Detail:
Dimensions (W x H x D) 6 1/2 x 10 1/2 x 12 3/4 inches
Imager 3-chip 2/3-inch type CMOS
Mass 7 lb 7.9 oz
Operating Temperature 14°F to +113°F
Power Consumption Approx.18W (Camera body only)
Approx. 21W (Camera body with supplied viewfinder)
Power Requirements CCU: DC48V, 2.8A (max.)
Ext.DC In: DC12V, 5.4A (max.)
Storage Temperature -4°F to +140°F

 

Input Connectors Specifications Detail:
Audio Input XLR type: 3-pin, female (1 each)
MIC IN: -60dBu (Up to -20dBu can be set by using menu or HXCU-FB70), balanced
LINE IN: 0dBu, balanced

 

Input/Output Connectors Specifications Detail:
CCU Optical Fiber (x1), CCFN cable or Single Mode Fiber cable (LC type)
Intercom XLR type, 5-pin, female (1)
Prompter BNC (x1); Gen-Lock In or Prompter Out
Remote 8pin (x1)
Viewfinder 20-pin (1), for HDVF only

 

Inputs and Outputs Specifications Detail:
DC In XLR-type 4-pin (x1), DC 10.5 V to 17 V
DC Out 4-pin (1), DC 10.5 V to 17 V, 1.5 A (max.)
Test Out TEST Out (Analog output with/without characters), or HD/SD Sync Out
USB USB 2.0 (x1)